• ARO Plank 7
  • ARO Plank 7
  • ARO Plank 7

ARO Plank 7

ARO Plank 7 enables customization by switching up standard colors and a few standard components. Choose from hundreds of leather colors for each of three distinct modules to make a wall installation that’s all your own.

  • Designer Architecture Research Office
  • Content European Cowhide + Akustika 10 Substrate
  • Thickness 2 in (5.1 cm) (includes Interlock Mounting System)
  • Module Sizes A: 5’-6” (167.6 cm) x 3 1/2” (8.9 cm) x 1 1/4” (3.2 cm)
  • B: 2’-7” (78.7 cm) x 2” (5.1 cm) x 1 1/4” (3.2 cm)
  • C: 2” (5.1 cm) x 2” (5.1 cm) x 3/4” (1.9 cm)
  • Standard Pattern One standard pattern may be configured with any combination of leather colors
  • Pattern Repeat Width 7’-5 3/4” (228.0 cm)
  • Pattern Repeat Height 11 in (27.9 cm)
  • Leather Types AD, AL, AQ, AU, CA, CO, CV, DE, DL, DT, DV, ES, ET, FE, HT, LC, LU, MA, MM, PT, RA, RU, SA, SL, SS, UM, VO, VP, VZ
  • Leather Colors Refer to Spinneybeck Color Book for available leather colors
  • FilzFelt Felts FilzFelt felts may also be specified—For more information, please download the product cut sheet or visit filzfelt.com
  • Durability Contract
  • Maintenance For finished leathers, wipe with a cool, damp cloth. For tougher soiling, use a pH-balanced soap and rinse. Repeat, if needed. For naked (aniline) leathers, wipe entire surface with a soft cloth and cool water to even out any abrasions or stains. Do not spot rub, for it will darken only that area. Other leather cleaners such as saddle soap or household cleaners that may contain harsh chemicals, alcohol or ink removers should never be used.
  • Lead Time Made to order and certain lead times will apply
  • Installation Installs with Interlock Mounting System provided (wall fasteners not included)
  • Variation Spinneybeck leather is a natural material and slight variations in color and thickness may be evident between dye lots or production runs. The fiber structure will vary within a hide and from hide to hide which can impact how the aniline dyes are absorbed. Full aniline leathers will have a higher variation between dye lots and therefore we cannot guarantee exact color matching. A Cutting for Approval (CFA) is always recommended for full aniline leathers. Although there can be some variation from dye lot to dye lot, semi-aniline leathers are more consistent in color and uniformity.
  • Colorfastness to Light Varies—Refer to leather product page for complete specifications
  • Colorfastness to Crocking Varies—Refer to leather product page for complete specifications
  • Flammability Test reports available upon request
Part of the MillerKnoll collective