Spinneybeck leather maintenance products

To order any leather maintenance products please visit the Spinneybeck shop

Finished Leather Cleaner, Conditioner and Protector, 8 oz. bottle [FLCP 8B] Leather is subject to drying due to low relative humidity caused by heating systems and air conditioning. This product is designed to restore lost moisture and leave a protective film that protects from soiling while providing a vapor barrier to inhibit moisture loss. Using a circular motion, apply conditioner with a soft cloth or sponge. You may buff when dry to enhance sheen.

Aniline Leather Cleaner, Conditioner and Protector, 8 oz. bottle [ALCP 8B] Aniline leathers have the least amount of protective film, if any at all. Care has to be taken to ensure that soil and stains are removed quickly in order to prevent fiber discoloration. Most anilines are treated at the tannery with a protective coating to help protect against staining. Cleaning may remove some of the protective properties, but this Spinneybeck product imparts protection while cleaning. Aniline leather should be tested in an inconspicuous area first. The area should discolor but should dry without staining; if this is the case you may proceed. Remove all soil and dirt from area to be cleaned with a lightly damp sponge. Apply cleaner to a dry cloth and clean soiled area using a circular motion. If the color is somewhat darker after cleaning and drying, it will normally return to its original color within a few days. The process can be quickened by stretching the affected area.

Grain Sueded Cleaning Pad [GSCP 0C] The light abrasive action of the cleaning pad will remove some of the soiled fiber through the sanding action. Loose fibers should be vacuumed from the surface of the leather. Note: very vigorous abrasion can increase nap size.

Ink Remover for All Leathers, 2 oz. bottle [IRAL 2B] This product is designed to pull ink or marker stains from leather. If the stain is fresh, it will usually come off with one simple application. Apply ink remover with a cotton-tipped swab or a cloth, let sit for a minute, then gently rub. If the stain is not fresh, then mix the ink remover with corn starch to form a paste. Place the paste on the affected area and allow to dry. Once dry, remove by vacuum cleaning or by gently brushing area.

Caution: Keep out of reach of small children. If ingested, consult a physician immediately.